Site Preparation - How to Prepare Your Site

How get the best possible results with your new lawn

1. All existing lawns and weeds need to be sprayed with Roundup 14 days before laying your new lawn.
    
2. Excavation is needed if the existing ground is compacted and the levels are too high against paths and driveways. The level should be 150mm to 200mm below any path.
   
   
3. Soil quality. Your local nursery will be able to give you advice.  If it is of poor quality (clay based or too sandy) this can be rectified by purchasing a good quality top soil from your local nursery. Quantity of soil required for every 100 sq metres is between 5 and 10 tonnes, which will give you a depth of 25mm to 50mm.
   
   
4. Spread the top soil out evenly using a rake or a piece of timber. Making the surface, to be turfed, as flat as possible will give a better result
   
   
5. If the top soil doesn’t have any fertilizers mixed in then add, at the recommended rate, fertilizer/lawn food to the area to get the best possible results.
   
   
6. If your soil is of good quality, this should be sprayed with Roundup and left for the 14 days, as above. The area needs to be worked over to a depth of 100 – 200mm (hire a cultivator or a rotary hoe for larger areas).
   
   
7. For best results the turf should be layed on the day it is delivered.
   
   
8. Water within 30 minutes of laying. Turf requires immediate soil contact and moisture to thrive.

How to Measuring Your Site

Measure the length and width in metres and multiply the two measurements.
If you have an irregular shape, draw a plan and draw rectangles over the area and add up the total in square metres.

How to measure odd shapes - Click here

Copyright © 2010 J & B Buffalo Turf Supplies Sydney - Website Design By FX Design Studio